Electronic Encapsulants

Encapsulating Systems for Electronics
Electronics

Home Adhesive Catalogs Adhesive Data Sheets Adhesive Manuals

. For more information contact:
Adhesive
HotLines
U.S. and Canada
1-800-323-5158
Fax
1-800-353-7770

World Wide
01-847-437-7773
Fax
01-847-437-8006

To Glu Guru Adhesive Tech Center

To Adhesive World

To Dymax UV Products


	Click on image for larger view. Use back button to return to page.

Safety/handling Araldite
and
Arathane Encapsulating Systems

It is important that the Material Safety Data Sheets (MSDS) for each encapsulating
product be read and understood before using the products.

Ciba Speciality Chemcials' encapsulating materials are chemicals that must be
handled properly. The following are precautions to be taken when using encapsulating systems and other chemical substances to minimize personal exposure..

Protective clothing

Gloves and safety glasses must be worn and coveralls are recommended. Discard contaminated clothes and gloves immediately after use.

Contaminated skin

Remove material that has splashed on skin with absorbent paper, then wash with warm water and an alkali-free soap. Never use solvents to cleanse skin because they can destroy natural skin protection.

Skin protection

Before starting work, apply barrier cream to all exposed skin areas. After work, wash hands thoroughly and apply barrier or moisturizing cream.

Spills
Wipe up small spills immediately with disposable towels; soak up large spills with sawdust

Ventilation
Renew air three to five times per hour in the work-shop and install exhaust fans near workbench areas.

Precaution for specific materials

The precautions listed above should be tailored to the particular operation to be performed and to the specific material to be used, in accordance with the Material Safety Data Sheets.

Ciba Specialty Chemicals has safety specialists who are available to assist you in choosing safety equipment and procedures. For detailed information, Call 1-800-323-5158


	For More Information Call 1-800-323-5158 or Email mike@on-hand.com